pkg_add: Warning: package `digest-20111104' was built for a platform: pkg_add: NetBSD/i386 5.99.60 (pkg) vs. NetBSD/i386 6.0_BETA (this host) cdrtools-3.01alpha07nb1: copying /usr/pkg/share/examples/cdrtools/cdrecord to /usr/pkg/etc/cdrecord.conf libffi-3.0.9nb1: registering info file /usr/pkg/info/libffi.info No schema files found: doing nothing. dbus-1.2.4.6nb4: copying /usr/pkg/share/examples/dbus/session.conf to /usr/pkg/etc/dbus-1/session.conf dbus-1.2.4.6nb4: copying /usr/pkg/share/examples/dbus/system.conf to /usr/pkg/etc/dbus-1/system.conf dbus-1.2.4.6nb4: setting permissions on /usr/pkg/libexec/dbus-daemon-launch-helper (o=root, g=dbus, m=4511) =========================================================================== The following files should be created for dbus-1.2.4.6nb4: /etc/rc.d/dbus (m=0755) [/usr/pkg/share/examples/rc.d/dbus] =========================================================================== The databases in [/usr/pkg/share/applications] could not be updated. xmlcatmgr-2.2nb1: copying /usr/pkg/share/examples/xmlcatmgr/catalog.etc.sgml to /usr/pkg/etc/sgml/catalog xmlcatmgr-2.2nb1: copying /usr/pkg/share/examples/xmlcatmgr/catalog.etc.xml to /usr/pkg/etc/xml/catalog xmlcatmgr-2.2nb1: copying /usr/pkg/share/examples/xmlcatmgr/catalog.share.sgml to /usr/pkg/share/sgml/catalog xmlcatmgr-2.2nb1: copying /usr/pkg/share/examples/xmlcatmgr/catalog.share.xml to /usr/pkg/share/xml/catalog avahi-0.6.30nb6: copying /usr/pkg/share/examples/avahi/avahi-daemon.conf to /usr/pkg/etc/avahi/avahi-daemon.conf avahi-0.6.30nb6: copying /usr/pkg/share/examples/avahi/avahi-dnsconfd.action to /usr/pkg/etc/avahi/avahi-dnsconfd.action avahi-0.6.30nb6: copying /usr/pkg/share/examples/avahi/hosts to /usr/pkg/etc/avahi/hosts avahi-0.6.30nb6: copying /usr/pkg/share/examples/avahi/services/sftp-ssh.service to /usr/pkg/etc/avahi/services/sftp-ssh.service avahi-0.6.30nb6: copying /usr/pkg/share/examples/avahi/services/ssh.service to /usr/pkg/etc/avahi/services/ssh.service avahi-0.6.30nb6: copying /usr/pkg/share/examples/avahi/avahi-dbus.conf to /usr/pkg/etc/dbus-1/system.d/avahi-dbus.conf =========================================================================== The following files should be created for avahi-0.6.30nb6: /etc/rc.d/avahidaemon (m=0755) [/usr/pkg/share/examples/rc.d/avahidaemon] =========================================================================== fftw-3.3.1: registering info file /usr/pkg/info/fftw3.info gdbm-1.10nb3: registering info file /usr/pkg/info/gdbm.info libIDL-0.8.14nb3: registering info file /usr/pkg/info/libIDL2.info GConf-2.32.4nb3: copying /usr/pkg/share/examples/GConf/path to /usr/pkg/etc/gconf/2/path policykit-0.9nb10: /var/lib/misc/PolicyKit.reload already exists policykit-0.9nb10: copying /usr/pkg/share/examples/policykit/PolicyKit.conf to /usr/pkg/etc/PolicyKit/PolicyKit.conf policykit-0.9nb10: copying /usr/pkg/share/examples/policykit/org.freedesktop.PolicyKit.conf to /usr/pkg/etc/dbus-1/system.d/org.freedesktop.PolicyKit.conf policykit-0.9nb10: setting permissions on /usr/pkg/libexec/polkit-explicit-grant-helper (o=root, g=polkit, m=2555) policykit-0.9nb10: setting permissions on /usr/pkg/libexec/polkit-grant-helper (o=root, g=polkit, m=2555) policykit-0.9nb10: setting permissions on /usr/pkg/libexec/polkit-read-auth-helper (o=root, g=polkit, m=2555) policykit-0.9nb10: setting permissions on /usr/pkg/libexec/polkit-revoke-helper (o=root, g=polkit, m=2555) consolekit-0.3.0nb8: copying /usr/pkg/share/examples/consolekit/00-primary.seat to /usr/pkg/etc/ConsoleKit/seats.d/00-primary.seat consolekit-0.3.0nb8: copying /usr/pkg/share/examples/consolekit/ConsoleKit.conf to /usr/pkg/etc/dbus-1/system.d/ConsoleKit.conf hal-0.5.14nb6: copying /usr/pkg/share/examples/hal/hal.conf to /usr/pkg/etc/dbus-1/system.d/hal.conf =========================================================================== The following files should be created for hal-0.5.14nb6: /etc/rc.d/hal (m=0755) [/usr/pkg/share/examples/rc.d/hal] =========================================================================== pulseaudio-0.9.21nb14: copying /usr/pkg/share/examples/pulseaudio/pulseaudio-system.conf to /usr/pkg/etc/dbus-1/system.d/pulseaudio-system.conf pulseaudio-0.9.21nb14: copying /usr/pkg/share/examples/pulseaudio/client.conf to /usr/pkg/etc/pulse/client.conf pulseaudio-0.9.21nb14: copying /usr/pkg/share/examples/pulseaudio/daemon.conf to /usr/pkg/etc/pulse/daemon.conf pulseaudio-0.9.21nb14: copying /usr/pkg/share/examples/pulseaudio/default.pa to /usr/pkg/etc/pulse/default.pa pulseaudio-0.9.21nb14: copying /usr/pkg/share/examples/pulseaudio/system.pa to /usr/pkg/etc/pulse/system.pa pulseaudio-0.9.21nb14: setting permissions on /usr/pkg/bin/pulseaudio (o=root, g=wheel, m=4511) libidn-1.24: registering info file /usr/pkg/info/libidn-components.png libidn-1.24: registering info file /usr/pkg/info/libidn.info ImageMagick-6.7.5.10nb1: copying /usr/pkg/share/examples/ImageMagick/coder.xml to /usr/pkg/etc/ImageMagick/coder.xml ImageMagick-6.7.5.10nb1: copying /usr/pkg/share/examples/ImageMagick/colors.xml to /usr/pkg/etc/ImageMagick/colors.xml ImageMagick-6.7.5.10nb1: copying /usr/pkg/share/examples/ImageMagick/delegates.xml to /usr/pkg/etc/ImageMagick/delegates.xml ImageMagick-6.7.5.10nb1: copying /usr/pkg/share/examples/ImageMagick/log.xml to /usr/pkg/etc/ImageMagick/log.xml ImageMagick-6.7.5.10nb1: copying /usr/pkg/share/examples/ImageMagick/magic.xml to /usr/pkg/etc/ImageMagick/magic.xml ImageMagick-6.7.5.10nb1: copying /usr/pkg/share/examples/ImageMagick/mime.xml to /usr/pkg/etc/ImageMagick/mime.xml ImageMagick-6.7.5.10nb1: copying /usr/pkg/share/examples/ImageMagick/policy.xml to /usr/pkg/etc/ImageMagick/policy.xml ImageMagick-6.7.5.10nb1: copying /usr/pkg/share/examples/ImageMagick/sRGB.icc to /usr/pkg/etc/ImageMagick/sRGB.icc ImageMagick-6.7.5.10nb1: copying /usr/pkg/share/examples/ImageMagick/thresholds.xml to /usr/pkg/etc/ImageMagick/thresholds.xml ImageMagick-6.7.5.10nb1: copying /usr/pkg/share/examples/ImageMagick/type-dejavu.xml to /usr/pkg/etc/ImageMagick/type-dejavu.xml ImageMagick-6.7.5.10nb1: copying /usr/pkg/share/examples/ImageMagick/type-ghostscript.xml to /usr/pkg/etc/ImageMagick/type-ghostscript.xml ImageMagick-6.7.5.10nb1: copying /usr/pkg/share/examples/ImageMagick/type-windows.xml to /usr/pkg/etc/ImageMagick/type-windows.xml ImageMagick-6.7.5.10nb1: copying /usr/pkg/share/examples/ImageMagick/type.xml to /usr/pkg/etc/ImageMagick/type.xml pkg_add: package `ImageMagick-6.7.5.10nb1' was already installed as dependency, now marked as installed manually bash-4.2nb1: registering info file /usr/pkg/info/bash.info aalib-1.4.0.5nb2: registering info file /usr/pkg/info/aalib.info esound-0.2.41nb1: copying /usr/pkg/share/examples/esound/esd.conf to /usr/pkg/etc/esd.conf nas-1.9.1nb2: copying /usr/pkg/share/examples/nas/nasd.conf.eg to /usr/pkg/etc/nas/nasd.conf =========================================================================== The following files should be created for nas-1.9.1nb2: /etc/rc.d/nasd (m=0755) [/usr/pkg/share/examples/rc.d/nasd] =========================================================================== mjpegtools-1.9.0nb6: registering info file /usr/pkg/info/mjpeg-howto.info ffmpeg-20120112.0.7.11nb3: copying /usr/pkg/share/examples/ffmpeg/ffserver.conf to /usr/pkg/etc/ffserver.conf pkg_add: package `bash-4.2nb1' was already installed as dependency, now marked as installed manually =========================================================================== $NetBSD: MESSAGE.cdrecord.conf,v 1.1.1.1 2006/01/05 23:27:59 wiz Exp $ Note: The location of the cdrtools-3.01alpha07 `defaults' file has been set to /usr/pkg/etc/cdrecord.conf This is the pkgsrc standard config file location, NOT the cdrtools-3.01alpha07 standard location, which is /etc/default/cdrecord. The reason for this is that pkgsrc packages should not use configuration files outside /usr/pkg unless they are explicitly set by the user. =========================================================================== =========================================================================== $NetBSD: MESSAGE,v 1.1.1.1 2008/12/20 17:24:48 ahoka Exp $ Full documentation for this package is available from: http://0pointer.de/lennart/projects/libdaemon/reference/html/index.html =========================================================================== =========================================================================== $NetBSD: MESSAGE,v 1.1 2006/12/17 15:39:33 jmmv Exp $ You should enable the dbus system-wide daemon for correct operation. You can do this by using one of the three start-up scripts installed by the package. Use: * /usr/pkg/share/examples/rc.d/dbus: if you are using NetBSD's and pkgsrc's rc.subr start-up framework. * /usr/pkg/share/examples/rc.d/messagebus.redhat: if you are using a Red-Hat based system (such as Fedora Core). * /usr/pkg/share/examples/rc.d/rc.messagebus.slackware: if you are using a Slackware-like system. =========================================================================== =========================================================================== $NetBSD: MESSAGE,v 1.5 2004/01/23 17:12:16 jmmv Exp $ The following catalogs have been installed: * /usr/pkg/etc/sgml/catalog System wide SGML catalog. Can be edited by the administrator and is not changed by packages. This is the *default* catalog when working in SGML mode. * /usr/pkg/etc/xml/catalog System wide XML catalog. Can be edited by the administrator and is not changed by packages. This is the *default* catalog when working in XML mode. * /usr/pkg/share/sgml/catalog Handles SGML stuff installed under /usr/pkg/share/sgml. Automatically handled by packages. * /usr/pkg/share/xml/catalog Handles XML stuff installed under /usr/pkg/share/xml. Automatically handled by packages. =========================================================================== =========================================================================== $NetBSD: MESSAGE,v 1.1 2008/11/22 03:55:53 jmcneill Exp $ To use policykit-0.9nb10, the following things must exist on the system: (1) a kernel configured with the PROCFS option, and (2) a procfs filesystem mounted on /proc. =========================================================================== Executing '/bin/mkdir -p /usr/pkg/etc/hal/fdi/information' Executing '/bin/mkdir -p /usr/pkg/etc/hal/fdi/policy' Executing '/bin/mkdir -p /usr/pkg/etc/hal/fdi/preprobe' =========================================================================== $NetBSD: MESSAGE.NetBSD,v 1.2 2008/12/24 13:55:24 wiz Exp $ For the NetBSD 5.0+ HAL backend to function properly, your kernel needs to include /dev/drvctl support. If the /dev/drvctl device node does not exist, run the following command: # cd /dev # sh MAKEDEV drvctl For proper kernel support, the following directive must be in your kernel config: pseudo-device drvctl =========================================================================== =========================================================================== $NetBSD: MESSAGE.common,v 1.3 2008/12/18 16:36:11 jmcneill Exp $ This libao package provides its core library but no output plugins by itself. You will have to install an audio/libao-* plugin package in order to get audio working. libao-arts -- aRts plugin libao-esound -- EsounD (ESD or Enlighten Sound Daemon) plugin libao-macosx -- MacOS X plugin libao-oss -- OSS (Open Sound System) plugin libao-pulse -- PulseAudio plugin libao-sun -- Sun audio plugin Not all are available on every platform. =========================================================================== =========================================================================== $NetBSD: MESSAGE,v 1.3 2002/11/11 19:50:57 heinz Exp $ By default, ogg123 will decode to the OSS audio device. Alternatively you can use libao's "sun" (SUN audio/NetBSD audio) device. To setup your personal libao configuration so it uses "sun" do: echo "default_driver=sun" > ~/.libao Read the ogg123(1) manual page for further information. =========================================================================== =========================================================================== $NetBSD: MESSAGE,v 1.1.1.1 2004/01/28 14:29:01 recht Exp $ Because of the unclear legal status of libdvdcss, it is not automatically installed as part of libdvdread. It is however needed to play encrypted DVDs. If you want to play encrypted DVDs, simply install it yourself. =========================================================================== =========================================================================== $NetBSD: MESSAGE,v 1.2 2002/09/24 12:30:54 wiz Exp $ To allow this package to coexist with other versions of Qt it has been installed in /usr/pkg/qt3/{bin,include,lib,doc}. You should be able to select this version of Qt when compiling programs which use it by ensuring that 1) QTDIR is set to /usr/pkg/qt3 2) Use the "configure" argument "--with-qt-dir=/usr/pkg/qt3" 3) you may also have to put /usr/pkg/qt3/bin in your PATH To access Qt-3 man pages add /usr/pkg/qt3/doc/man to your MANPATH environment variable. Note that the Qt-3 man pages are installed here to avoid conflicts with man pages of other Qt versions. ===========================================================================