pkg_add: Warning: package `digest-20111104' was built for a platform:
pkg_add: NetBSD/i386 5.99.60 (pkg) vs. NetBSD/i386 6.0_BETA (this host)
dbus-1.2.4.6nb4: copying /usr/pkg/share/examples/dbus/session.conf to /usr/pkg/etc/dbus-1/session.conf
dbus-1.2.4.6nb4: copying /usr/pkg/share/examples/dbus/system.conf to /usr/pkg/etc/dbus-1/system.conf
dbus-1.2.4.6nb4: setting permissions on /usr/pkg/libexec/dbus-daemon-launch-helper (o=root, g=dbus, m=4511)
===========================================================================
The following files should be created for dbus-1.2.4.6nb4:

	/etc/rc.d/dbus (m=0755)
	    [/usr/pkg/share/examples/rc.d/dbus]

===========================================================================
openslp-1.2.1nb4: copying /usr/pkg/share/examples/openslp/slp.conf to /usr/pkg/etc/slp.conf
openslp-1.2.1nb4: copying /usr/pkg/share/examples/openslp/slp.reg to /usr/pkg/etc/slp.reg
openslp-1.2.1nb4: copying /usr/pkg/share/examples/openslp/slp.spi to /usr/pkg/etc/slp.spi
===========================================================================
The following files should be created for openslp-1.2.1nb4:

	/etc/rc.d/slpd (m=0755)
	    [/usr/pkg/share/examples/rc.d/slpd]

===========================================================================
libpaper-1.1.24: copying /usr/pkg/share/examples/libpaper/papersize to /usr/pkg/etc/papersize
cups-1.5.2nb1: copying /usr/pkg/share/examples/cups/cupsd.conf to /usr/pkg/etc/cups/cupsd.conf
cups-1.5.2nb1: copying /usr/pkg/share/examples/cups/snmp.conf to /usr/pkg/etc/cups/snmp.conf
===========================================================================
The following files should be created for cups-1.5.2nb1:

	/etc/rc.d/cupsd (m=0755)
	    [/usr/pkg/share/examples/rc.d/cupsd]

===========================================================================
===========================================================================
$NetBSD: MESSAGE,v 1.1 2008/12/05 01:57:07 smb Exp $

To change the default paper size to US Letter, make sure that

	LC_MESSAGES=en_US.UTF-8

is in your environment.
===========================================================================
===========================================================================
$NetBSD: MESSAGE,v 1.1 2006/12/17 15:39:33 jmmv Exp $

You should enable the dbus system-wide daemon for correct operation.  You
can do this by using one of the three start-up scripts installed by the
package.  Use:

* /usr/pkg/share/examples/rc.d/dbus:
  if you are using NetBSD's and pkgsrc's rc.subr start-up framework.

* /usr/pkg/share/examples/rc.d/messagebus.redhat:
  if you are using a Red-Hat based system (such as Fedora Core).

* /usr/pkg/share/examples/rc.d/rc.messagebus.slackware:
  if you are using a Slackware-like system.

===========================================================================
===========================================================================
$NetBSD: MESSAGE,v 1.10 2008/12/14 17:17:55 ahoka Exp $

You will need to also install print/ghostscript if you wish to
print to non-Postscript printers.

You may install additional PPD files for other printer models into
/usr/pkg/share/cups/model.

You may want to backup /etc/printcap before starting CUPS for the first
time, as the CUPS scheduler may overwrite this file with automatically
generated content.
===========================================================================